GE Honda HF120
| HF120 | |
|---|---|
| |
| Type | Turbofan |
| National origin | Japan/United States |
| Manufacturer | GE Honda Aero Engines |
| First run | 2009[1] |
| Major applications | Honda HA-420 HondaJet |
The GE Honda HF120 is a small turbofan for the light business jet market, the first engine to be produced by GE Honda Aero Engines.
Development
[edit]
Succeeding Honda's original HF118 prototype, the HF120 was undergoing testing in July 2008, with certification targeted for late 2009.[2] The first engines were produced at GE's factory, but in November 2014 production shifted to Burlington, North Carolina.[3] The U.S. Federal Aviation Administration (FAA) awarded Part 33 certification to the HF120 turbofan engine in December 2013, and production certification in 2015.[4]
Design
[edit]The engine has a wide-chord swept fan, two-stage low-pressure compressor and counter rotating high-pressure compressor based on a titanium impeller, for a 2,050 lbf (9.1 kN) takeoff thrust.[5] The HF120 engine's components interact with greater efficiency by incorporating 3D aerodynamic design, and its effusion-cooled combustor design emits low NOx, CO and HC. Noise levels are quieter than Stage 4 requirements.[6]
In May 2016 time between overhaul was 2,500 h, which was expected to mature to 5,000 h; a midlife hot-section inspection is not required, and it is expected to remain on wing 40% longer than other engines and have lower operating costs.[7]
Operational history
[edit]Besides the HondaJet, HF120 was announced as a retrofit to the Cessna CitationJet CJ1 by Sierra Industries,[8] in partnership with GE Honda.[9]
In addition, Spectrum Aeronautical has announced it is planning to use HF120 for its upcoming S-40 Freedom.[10]
Applications
[edit]Specifications
[edit]Data from Honda[11]
General characteristics
- Type: Turbofan engine
- Length: 59.5 in (151 cm) (end-to-end)
- Diameter: 25.8 in (66 cm)
- Dry weight: 211.3 kg (466 lb) with basic accessories and optional equipment[12]
Components
- Compressor: One wide-chord fan, two axial LP stages, one centrifugal HP stage.
- Combustors: Compact reverse flow annular
- Turbine: One axial HP stage (48,777 rpm), two axial LP stages (19,055 rpm).
Performance
- Maximum thrust: 2,050 lbf (9.1 kN) (Takeoff)
- Overall pressure ratio: 24:1
- Bypass ratio: 2.9:1
- Turbine inlet temperature: 1,580 °F (860 °C) (Takeoff)
- Specific fuel consumption: <0.7 lb/lbf/h (71 kg/kN/h)
- Thrust-to-weight ratio: 4.4
See also
[edit]Related lists
References
[edit]- ^ "GE Honda's HF120 Engine Completes First Run Test" (Press release). GE Aviation. October 19, 2009. Archived from the original on January 7, 2017. Retrieved June 30, 2016.
- ^ "Engine Prototyping prepares GE Honda Aero Engines for certification tests" (Press release). GE Aviation Press Release. July 28, 2008.
- ^ Curt Epstein (12 November 2014). "GE Honda Transitions HF120 Production to N. Carolina". Aviation International News.[permanent dead link]
- ^ Chad Trautvetter (18 March 2015). "GE Honda Wins FAA Production Certificate for HF120 Engine". Aviation International News.
- ^ "GE Honda Aero Engines". Flight International. Archived from the original on August 11, 2011.
- ^ "HF120 Engine". GE Honda Aero Engines.
- ^ Fred George (May 26, 2016). "GE Honda HF120-H1A Turbofans". Business & Commercial Aviation. Aviation Week.
- ^ Chad Trautvetter (18 September 2014). "Sierra Selects GE Honda HF120 for Sapphire CitationJet Upgrade Program". Aviation International News.
- ^ Dan Parsons (20 October 2014), "GE Honda launches Cessna jet engine retrofit programme", Flightglobal
- ^ "The Spectrum Freedom S.40 Overview".
- ^ "HF120 Turbofan Engine". Honda Worldwide. Retrieved September 29, 2017.
- ^ "TCDS No.: IM.E.054" (PDF). EASA. 20 April 2016. Archived from the original (PDF) on 18 January 2021. Retrieved 1 June 2018.
External links
[edit]